




Language
Model: KC.IA.00432
The TOXU KC.IA.00432 is an adhesive-backed FPC antenna for GPS L1 and dual-band Wi-Fi. It combines a contoured antenna element with a single black RF1.13 coaxial lead and an I-PEX Gen 1-style micro-coaxial plug.
GPS L1 and Dual-Band Wi-Fi
Covers GPS L1 at 1575.42 MHz and Wi-Fi at 2400–2500 MHz and 5150–5850 MHz.
Contoured 49.71 × 17.9 mm FPC
The shaped outline provides a defined footprint for fitting the antenna inside an enclosure.
Adhesive Backing with Rear Reinforcement
The FPC has a peel-off liner for internal mounting and a 0.2 mm rear stiffener.
Single 50 Ω RF Feed
The black RF1.13 coaxial lead terminates in an I-PEX Gen 1-style micro-coaxial plug.
The TOXU KC.IA.00432 is an embedded flexible printed circuit (FPC) antenna for GPS L1 and dual-band Wi-Fi. It covers 1575.42 MHz for GPS L1 and 2400–2500 MHz and 5150–5850 MHz for Wi-Fi through a single 50 Ω RF feed.
The assembly includes a contoured adhesive-backed FPC element, a black RF1.13 coaxial lead and a micro-coaxial plug. The antenna can be placed on a suitable internal enclosure surface and connected to the host board through the coaxial lead.
GPS L1 and 2.4/5 GHz Wi-Fi Coverage
One antenna element covers GPS L1 at 1575.42 MHz and the specified 2.4 GHz and 5 GHz Wi-Fi ranges.
Contoured FPC Element
The antenna has a nominal outer footprint of 49.71 × 17.9 mm. Check the shaped outline against enclosure ribs and nearby components when evaluating fit.
Adhesive Mounting with Rear Stiffener
The adhesive backing has a peel-off liner for installation. A 0.2 mm stiffener reinforces the back of the FPC.
Pre-Terminated RF1.13 Coaxial Lead
The black coaxial lead has a nominal outer diameter of 1.13 mm and terminates in an I-PEX Gen 1-style micro-coaxial plug.
| Attribute | Value |
|---|---|
| Product Model | KC.IA.00432 |
| Antenna Type | Embedded GPS and Wi-Fi FPC antenna |
| GPS L1 Frequency | 1575.42 MHz |
| Wi-Fi Frequency Range | 2400–2500 MHz and 5150–5850 MHz |
| Input Impedance | 50 Ω |
| VSWR | < 2.0 |
| Specified Gain | 0.5–3 dBi |
| FPC Outer Dimensions | (49.71 ± 0.2) × (17.9 ± 0.2) mm |
| Rear Stiffener Thickness | 0.2 mm |
| Coaxial Cable | Black RF1.13, 1.13 mm nominal outer diameter |
| RF Connector | I-PEX Gen 1-style micro-coaxial plug |
| FPC Edge-to-Connector Center Dimension | 54 ± 2 mm |
| Mounting | Adhesive backing with peel-off liner |
| Operating Temperature | −20 to +60 °C |
| Storage Temperature | −20 to +60 °C |
The assembly consists of a contoured black FPC antenna element with adhesive backing and a rear stiffener, a black RF1.13 coaxial lead and a micro-coaxial plug.
For enclosure layout, use the 49.71 × 17.9 mm nominal FPC footprint and the 54 ± 2 mm dimension measured from the cable-exit edge of the FPC to the center of the plug.

Connected Positioning Devices
For compact devices that use GPS L1 positioning and dual-band Wi-Fi connectivity with a shared antenna feed.
Embedded Wireless Terminals
For equipment with a suitable internal mounting surface and an RF layout that accommodates the shaped FPC and short coaxial lead.
Confirm that the host RF design supports a shared antenna feed for GPS L1 and Wi-Fi. Check the mating receptacle, cable reach and mounting clearance before fixing the antenna in place.
Evaluate GPS reception and Wi-Fi performance in the assembled enclosure with the PCB, battery and nearby metal in their intended positions.
TOXU supplies embedded antennas, RF connectors and coaxial cable assemblies. Share the required frequency bands, enclosure layout and mating receptacle part number for a configuration review.
Enclosure Fit Review
TOXU can review the FPC footprint and lead reach against your device layout.
RF Interface Selection
Provide the host receptacle drawing to review the mating interface before ordering.
TOXU develops and manufactures communication antennas, GNSS antennas, RF connectors and coaxial cable assemblies for OEM integration.
Which frequencies does the KC.IA.00432 cover?
The antenna covers GPS L1 at 1575.42 MHz and Wi-Fi at 2400–2500 MHz and 5150–5850 MHz.
How many RF connections does the antenna have?
The assembly has one 50 Ω coaxial feed and one I-PEX Gen 1-style plug. Verify that your host RF design supports the shared feed.
What does the 54 mm dimension measure?
It measures from the cable-exit edge of the FPC to the center of the plug. The assembly drawing specifies a tolerance of ±2 mm for this dimension.