Built-in RTK GPS Antenna
GNSS Car Antenna
GNSS Car Antenna

Products

Home >  Products > Embedded Antennas > Wi-Fi®/Bluetooth® Series > 
>
<

2.4/5.8 GHz Embedded FPC Antenna for Wi-Fi and Bluetooth with RF1.13 Cable

Model: KC.IA.00321

The TOXU KC.IA.00321 is an adhesive-backed FPC antenna for 2.4 GHz and 5.8 GHz Wi-Fi and 2.4 GHz Bluetooth. It combines a slim flexible antenna element with a black RF1.13 coaxial lead and an I-PEX Gen 1-style micro-coaxial plug.

Dual-Band Wi-Fi and 2.4 GHz Bluetooth

The antenna supports 2.4 GHz and 5.8 GHz Wi-Fi, with Bluetooth using the 2.4 GHz band.

Slim Adhesive-Backed FPC

The 32.4 × 11.5 mm flexible element has a nominal thickness of 0.25 mm and a peel-off liner for internal mounting.

50 Ω RF1.13 Coaxial Lead

The black 1.13 mm coaxial cable terminates in an I-PEX Gen 1-style micro-coaxial plug.

2.5 dBi Specified Gain

The finished antenna assembly is specified at 2.5 dBi gain with VSWR below 2.0.

Leave a message Contact

Fill in your email address

Or you can continue to download without filling in

Product Description

Overview

The TOXU KC.IA.00321 is an embedded flexible printed circuit (FPC) antenna for 2.4 GHz and 5.8 GHz Wi-Fi and 2.4 GHz Bluetooth. The assembly includes a 32.4 × 11.5 mm adhesive-backed antenna element, a black RF1.13 coaxial lead and an I-PEX Gen 1-style micro-coaxial plug.

The narrow element fits along a suitable interior enclosure surface. The separate coaxial lead lets the designer position the antenna away from the radio board while keeping both inside the device.

Key Features

2.4 GHz and 5.8 GHz Wi-Fi

One FPC antenna element supports both nominal Wi-Fi bands and Bluetooth operation in the 2.4 GHz band.

Narrow FPC Footprint

The 11.5 mm nominal width suits enclosure layouts with a narrow mounting area. The FPC element has a nominal thickness of 0.25 mm.

Peel-and-Stick Mounting

Remove the release liner and apply the antenna to the selected interior enclosure surface.

Pre-Terminated RF1.13 Coaxial Lead

The 50 Ω miniature coaxial lead comes with an I-PEX Gen 1-style plug for connection to a verified mating receptacle.

Technical Specifications

AttributeValue
Product ModelKC.IA.00321
Antenna TypeEmbedded flexible printed circuit (FPC) antenna
Nominal Bands2.4 GHz and 5.8 GHz Wi-Fi, 2.4 GHz Bluetooth
Input Impedance50 Ω
VSWR< 2.0
Specified Gain2.5 dBi
FPC Length × Width(32.4 ± 0.2) × (11.5 ± 0.2) mm
Nominal FPC Thickness0.25 mm
Coaxial CableBlack RF1.13, 1.13 mm nominal outer diameter
RF ConnectorI-PEX Gen 1-style micro-coaxial plug
Connector-to-Feed Reference Dimension90 ± 3 mm
MountingAdhesive backing with peel-off liner
Operating Temperature−20 to +60 °C
Storage Temperature−20 to +60 °C

Hardware Structure

The assembly consists of a black FPC element with adhesive backing, a black RF1.13 coaxial lead and a micro-coaxial plug. The FPC element measures 32.4 × 11.5 mm nominally, with a ±0.2 mm tolerance on both dimensions.

The 90 ± 3 mm reference dimension runs from the connector center to the marked reference at the FPC feed termination. Allow space for the FPC footprint, cable route and connector access when checking the enclosure layout.

KC

Applications

Embedded Wi-Fi and Bluetooth Devices

For wireless terminals and connected devices with a compatible radio interface and an internal antenna mounting surface.

Compact Gateways and Controllers

For compact enclosures where the radio board and antenna need to occupy separate positions.

System Integration

Check the mating receptacle part number and the cable reach before choosing the mounting position. Route the cable so it can reach the receptacle without pulling on the plug or the FPC feed connection.

Evaluate RF performance with the antenna installed in the closed enclosure and with the PCB, battery and nearby metal in their intended positions. If the design requires performance across specific channels, verify those channels in the installed configuration.

Complete RF Hardware Solution Support

TOXU supplies antennas, RF connectors and coaxial cable assemblies for OEM equipment. Share your operating channels, enclosure layout, connector part number and cable reach for a configuration review.

Why Choose TOXU

Mechanical Fit Review

TOXU can review the FPC footprint and cable reach against your enclosure layout.

RF Interface Selection

Share the mating receptacle drawing to review the plug configuration and cable routing before ordering.

About TOXU

TOXU develops and manufactures communication antennas, GNSS antennas, RF connectors and coaxial cable assemblies for OEM integration.

FAQ

Which bands does the KC.IA.00321 support?

The nominal bands are 2.4 GHz and 5.8 GHz for Wi-Fi and 2.4 GHz for Bluetooth. Share your required channels if you need a channel-specific review.

What does the 90 mm dimension measure?

It measures from the center of the micro-coaxial plug to the specified reference at the FPC feed termination. The finished assembly tolerance for this dimension is ±3 mm.

How is the antenna mounted inside the device?

Peel off the release liner and press the FPC onto a suitable interior enclosure surface. Verify the mounting position and RF performance in the assembled device.

Leave a Message

Your Name *

Email *

Tel

Content *

GPS Active GPS Antenna GNSS RTK Antenna
GPS Active GPS Antenna GNSS RTK Antenna
GNSS RTK Antenna