Built-in RTK GPS Antenna
GNSS Car Antenna
GNSS Car Antenna

Products

Home >  Products > Embedded Antennas > Wi-Fi®/Bluetooth® Series > 
>
<

2.4 GHz Embedded Bluetooth FPC Antenna with RF1.13 Cable

Model: KC.IA.00577

The TOXU KC.IA.00577 is a compact embedded FPC antenna for 2.4 GHz Bluetooth devices. It combines a narrow adhesive-backed antenna element with a black RF1.13 coaxial lead and an I-PEX Gen 1-style micro-coaxial plug.

2.4 GHz Bluetooth Coverage

The antenna covers 2400–2500 MHz, with a 50 Ω input impedance and VSWR below 2.0.

19.25 × 8.1 mm FPC Footprint

The rectangular FPC element has a nominal thickness of 0.25 mm for installation inside compact housings.

Adhesive-Backed Mounting

The peel-off liner exposes the adhesive for mounting on a suitable interior surface.

RF1.13 Lead with Gen 1-Style Plug

The 1.13 mm coaxial cable terminates in an I-PEX Gen 1-style micro-coaxial plug.

Leave a message Contact

Fill in your email address

Or you can continue to download without filling in

Product Description

Overview

The TOXU KC.IA.00577 is an embedded flexible printed circuit (FPC) antenna for Bluetooth devices operating in the 2.4 GHz band. It covers 2400–2500 MHz through a single 50 Ω RF feed.

The assembly includes a narrow rectangular FPC element, an adhesive backing and a black RF1.13 coaxial lead. The lead allows the antenna to mount on an interior enclosure surface away from the radio board.

Key Features

2400–2500 MHz Frequency Range

Designed for Bluetooth applications in the 2.4 GHz band, with a specified VSWR below 2.0.

Narrow Rectangular FPC

The antenna element measures 19.25 × 8.1 mm nominally, with a nominal thickness of 0.25 mm.

Peel-and-Stick Mounting

The adhesive backing secures the antenna to a suitable interior enclosure surface after the release liner is removed.

Pre-Terminated Coaxial Lead

The black RF1.13 lead comes with an I-PEX Gen 1-style plug for connection to a verified mating receptacle.

Technical Specifications

AttributeValue
Product ModelKC.IA.00577
Antenna TypeEmbedded Bluetooth FPC antenna
Frequency Range2400–2500 MHz
Input Impedance50 Ω
VSWR< 2.0
FPC Length × Width(19.25 ± 0.15) × (8.1 ± 0.15) mm
Nominal FPC Thickness0.25 mm
Coaxial CableBlack RF1.13, 1.13 mm nominal outer diameter
RF ConnectorI-PEX Gen 1-style micro-coaxial plug
Connector-to-Feed Reference Dimension40 ± 2 mm
MountingAdhesive backing with peel-off liner
Operating Temperature−20 to +85 °C

Hardware Structure

The assembly consists of a rectangular black FPC element marked BT, an adhesive backing, a black coaxial lead and a micro-coaxial plug.

For enclosure layout, use the 19.25 × 8.1 mm nominal FPC footprint. The finished assembly drawing specifies 40 ± 2 mm from the plug center to the marked reference at the FPC feed area.

KC

Applications

Compact Bluetooth Sensors and Controllers

For devices with a compatible Bluetooth radio and a narrow interior surface available for antenna mounting.

Embedded Bluetooth Modules

For equipment designs that place the antenna and radio board in separate positions within the same enclosure.

System Integration

Verify the mating receptacle, mounting footprint and cable reach before attaching the antenna. Route the coaxial lead without pulling on the plug or the FPC solder joint.

Check Bluetooth performance in the closed enclosure with the PCB, battery and nearby metal in their intended positions.

Complete RF Hardware Solution Support

TOXU supplies embedded antennas, RF connectors and coaxial cable assemblies. Share your enclosure layout, operating band and mating connector part number for a configuration review.

Why Choose TOXU

Mechanical Fit Review

TOXU can review the FPC footprint and lead reach against your enclosure layout.

Connector Selection Support

Provide the host receptacle part number or drawing so TOXU can review the mating interface before ordering.

About TOXU

TOXU develops and manufactures communication antennas, GNSS antennas, RF connectors and coaxial cable assemblies for OEM integration.

FAQ

Which frequency range does the KC.IA.00577 cover?

The antenna covers 2400–2500 MHz for Bluetooth applications in the 2.4 GHz band.

What does the 40 mm dimension measure?

It measures from the center of the plug to the marked reference at the FPC feed area. The finished assembly tolerance for this dimension is ±2 mm.

How is the antenna mounted?

Remove the release liner and press the adhesive-backed FPC onto a suitable interior enclosure surface. Check cable reach before fixing the antenna in place.

Leave a Message

Your Name *

Email *

Tel

Content *

GPS Active GPS Antenna GNSS RTK Antenna
GPS Active GPS Antenna GNSS RTK Antenna
GNSS RTK Antenna