




Language
Model: TX-GNSS-28U10FQ
A u-blox M10 positioning board with an integrated ceramic patch antenna and a 6.5 mm board height.
Low-Profile Board. The 28 x 28 x 6.5 mm board fits designs with limited vertical clearance.
Integrated Ceramic Antenna. The ceramic patch is mounted on the GNSS board for direct integration into the host assembly.
Multi-Constellation GNSS. The receiver supports multiple satellite navigation systems.
Supply Voltage. The board operates from 3.0–5.5 V DC.
Board Weight. The module weighs 12.6 g.
TX-GNSS-28U10FQ is a single-band M10 receiver board for embedded positioning. The 6.5 mm board height makes it the thinnest of the three M10 boards in this series. It pairs an integrated ceramic patch with an onboard serial interface.
Low-Profile Board
The 28 x 28 x 6.5 mm board fits designs with limited vertical clearance.
Integrated Ceramic Patch
The patch antenna is mounted directly on the receiver board.
Position Update Rate
The specified rate is 0.25–10 Hz.
Board Connector
The board uses a 6-pin SH, 1.0 mm pitch connector.
Supply Voltage
The board operates from 3.0–5.5 V DC.
| Attribute | Value |
|---|---|
| Product Model | TX-GNSS-28U10FQ |
| Antenna Type | Integrated ceramic patch |
| GNSS Receiver | UBX-M10050-KB |
| Receiver Channels | 96 |
| Frequency Configuration | Single band |
| GNSS Signals | GPS L1 C/A; QZSS L1 C/A/S; BeiDou B1I/B1C; Galileo E1B/C; SBAS L1 C/A |
| Horizontal Position Accuracy | 1.5 m (SBAS, open sky) |
| Velocity Accuracy | 0.05 m/s |
| Cold Start | 27 s |
| Hot Start | 1 s |
| Position Update Rate | 0.25–10 Hz |
| Serial Baud Rate | 4800–921600 bps (default 38400) |
| Logic Level | TTL |
| Protocols | NMEA, UBX |
| Supply Voltage | 3.0–5.5 V DC |
| Power Consumption | <100 mW at 5 V |
| Connector | 6-pin SH, 1.0 mm pitch |
| Board Dimensions | 28 × 28 × 6.5 mm |
| Weight | 12.6 g |
| Operating Temperature | −35 to +75 °C |
| Storage Temperature | −40 to +85 °C |
| Altitude / Speed / Acceleration Limits | 80,000 m / <500 m/s / <4 g |
| LED Indicators | Green PPS, red power |
| Attribute | TX-GNSS-28U10FQ | TX-GNSS-18U10C | TX-GNSS-20U10Q | TX-GNSS-18Z6A | TX-GNSS-25UM620Q |
|---|---|---|---|---|---|
| Product Image | ![]() | ![]() | ![]() | ![]() | ![]() |
| Product Name | 28 mm M10 GNSS Module | 20 mm M10 GNSS Module with Compass (C Version) | 20 mm M10 GNSS Module with Compass (Q Version) | 18 mm AT6558R GNSS Module | 25 mm UM620 Dual-Band GNSS Module |
| GNSS Receiver | UBX-M10050-KB | UBX-M10050-KB | UBX-M10050-KB | AT6558R | UM620 |
| Receiver Channels | 96 | 96 | 96 | 99 | 96 |
| Frequency Configuration | Single band | Single band | Single band | Dual band (GPS L1/L5) | |
| GNSS Signals | GPS L1 C/A QZSS L1 C/A/S BeiDou B1I/B1C Galileo E1B/C SBAS L1 C/A | GPS L1 C/A QZSS L1 C/A/S BeiDou B1I/B1C Galileo E1B/C SBAS L1 C/A | GPS L1 C/A QZSS L1 C/A/S BeiDou B1I/B1C Galileo E1B/C SBAS L1 C/A | BeiDou, GPS and GLONASS | GPS L1 C/A, L5 QZSS L1, L5 BeiDou B1I, B2a GLONASS G1 Galileo E1, E5a SBAS L1 C/A |
| Horizontal Position Accuracy | 1.5 m (SBAS, open sky) | 1.5 m (SBAS, open sky) | 1.5 m (SBAS, open sky) | 1.5 m CEP (dual-band, four constellations, open sky) | |
| Velocity Accuracy | 0.05 m/s | 0.05 m/s | 0.05 m/s | <0.1 m/s | 0.05 m/s |
| Timing Accuracy | <30 ns | 20 ns | |||
| Cold Start | 27 s | 27 s | 27 s | ≤32 s | <26 s |
| Hot Start | 1 s | 1 s | 1 s | ≤1 s | <2 s |
| Position Update Rate | 0.25–10 Hz | 0.25–10 Hz | 0.25–10 Hz | 1 Hz default, up to 5 Hz | 1–10 Hz (default 1 Hz) |
| Serial Baud Rate | 4800–921600 bps (default 38400) | 4800–921600 bps (default 38400) | 4800–921600 bps (default 38400) | 4800–115200 bps (default 9600) | 115200 bps (default) |
| Logic Level | TTL | TTL | TTL | TTL | TTL |
| Protocols | NMEA, UBX | NMEA, UBX | NMEA, UBX | NMEA | NMEA 0183, RTCM 3.2, Unicore Protocol |
| Supply Voltage | 3.0–5.5 V DC | 3.0–5.5 V DC | 3.0–5.5 V DC | 3.3 V DC | 3.0–5.5 V DC |
| Power Consumption | <100 mW at 5 V | <100 mW at 5 V | <100 mW at 5 V | <100 mW at 5 V | <100 mW at 5 V |
| Connector | 6-pin SH, 1.0 mm pitch | 6-pin SH, 1.0 mm pitch | 6-pin SH, 1.0 mm pitch | 4-pin SH, 1.0 mm pitch | 6-pin SH, 1.0 mm pitch |
| Board Dimensions | 28 × 28 × 6.5 mm | 20 × 20 × 11.3 mm | 20 × 20 × 11.3 mm | 18 × 18 × 7 mm | 25 × 25 × 8 mm |
| Weight | 12.6 g | 7.5 g | 9.0 g | 7.4 g | 11.6 g |
| Electronic Compass | QMC5883L | QMC5883L | QMC5883L | ||
| Operating Temperature | −35 to +75 °C | −35 to +75 °C | −35 to +75 °C | −35 to +75 °C | −35 to +75 °C |
| Storage Temperature | −40 to +85 °C | −40 to +85 °C | −40 to +85 °C | −40 to +85 °C | −40 to +85 °C |
| Altitude / Speed / Acceleration Limits | 80,000 m / <500 m/s / <4 g | 80,000 m / <500 m/s / <4 g | 80,000 m / <500 m/s / <4 g | ||
| LED Indicators | Green PPS, red power | Green PPS, red power | Green PPS, red power |
| Attribute | TX-GNSS-25U9Q | TX-GNSS-28U9T | TX-GNSS-20U9A | TX-GNSS-20U9H | TX-GNSS-25M9NQ | TX-GNSS-25F10NQ |
|---|---|---|---|---|---|---|
| Product Image | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() |
| Product Name | 25 mm M9 GNSS Module with Compass | 28 mm M9 GNSS Module with Compass | M9 GNSS Module (A Version) | M9 GNSS Module (H Version) | 25 mm NEO-M9N GNSS Module with Compass | 25 mm NEO-F10N Dual-Band GNSS Module with Compass |
| GNSS Receiver | UBX-M9140 | UBX-M9140-KB | UBX-M9140 | UBX-M9140 | u-blox NEO-M9N | u-blox NEO-F10N |
| Receiver Channels | 92 | 92 | 92 | 92 | ||
| Frequency Configuration | Single band | Single band | Single band | Single band | Single band | Dual band (GPS L1/L5) |
| GNSS Signals | GPS L1 C/A QZSS L1 C/A/S BeiDou B1I GLONASS L1OF Galileo E1B/C SBAS L1 C/A | GPS L1 C/A QZSS L1 C/A/S BeiDou B1I GLONASS L1OF Galileo E1B/C SBAS L1 C/A | GPS L1 C/A QZSS L1 C/A/S BeiDou B1I GLONASS L1OF Galileo E1B/C SBAS L1 C/A | GPS L1 C/A QZSS L1 C/A/S BeiDou B1I GLONASS L1OF Galileo E1B/C SBAS L1 C/A | GPS L1 C/A QZSS L1 C/A/S BeiDou B1I GLONASS L1OF Galileo E1B/C SBAS L1 C/A | GPS L1 C/A, L5 QZSS L1 C/A, L5 |
| Horizontal Position Accuracy | 1.5 m CEP with SBAS; 2.5 m CEP without SBAS | 1.5 m CEP with SBAS; 2.5 m CEP without SBAS | 1.5 m CEP with SBAS; 2.5 m CEP without SBAS | 1.5 m CEP with SBAS; 2.5 m CEP without SBAS | 1.5 m CEP with SBAS; 2.5 m CEP without SBAS | |
| Velocity Accuracy | 0.05 m/s | 0.05 m/s | 0.05 m/s | 0.05 m/s | 0.05 m/s | 0.05 m/s |
| Timing Accuracy | 30 ns RMS; 60 ns (99%) | 30 ns RMS; 60 ns (99%) | 30 ns RMS; 60 ns (99%) | 30 ns RMS; 60 ns (99%) | 30 ns RMS; 60 ns (99%) | |
| Cold Start | 24 s | 24 s | 24 s | 24 s | 26 s | |
| Hot Start | 2 s | 2 s | 2 s | 2 s | 1 s | |
| Time Pulse Frequency | 0.25–25 Hz (default 1 Hz) | 0.25–25 Hz (default 1 Hz) | 0.25–25 Hz (default 1 Hz) | 0.25–25 Hz (default 1 Hz) | 0.25–25 Hz (default 1 Hz) | |
| Serial Baud Rate | 4800–921600 bps (default 38400) | 38400 bps (default) | 38400 bps (default) | 38400 bps (default) | 4800–921600 bps (default 38400) | |
| Logic Level | TTL | TTL | TTL | TTL | TTL | |
| Protocols | NMEA 0183, RTCM 3.3, UBX | NMEA 0183, RTCM 3.3, UBX | NMEA 0183, RTCM 3.3, UBX | NMEA 0183, RTCM 3.3, UBX | NMEA 0183 | |
| Supply Voltage | 3.0–5.5 V DC | 3.0–5.5 V DC | 3.0–5.5 V DC | 3.0–5.5 V DC | 3.0–5.5 V DC | 3.0–5.5 V DC |
| Power Consumption | <100 mW at 5 V | <100 mW at 5 V | <100 mW at 5 V | <100 mW at 5 V | <100 mW at 5 V | |
| Connector | 6-pin SH, 1.0 mm pitch | 6-pin SH, 1.0 mm pitch | 4-pin GH, 1.25 mm pitch | 4-pin GH, 1.25 mm pitch | 6-pin SH, 1.0 mm pitch | |
| Board Dimensions | 25 × 25 × 7.5 mm | 28 × 28 × 7 mm | 22 × 20 × 7.5 mm | 22 × 20 × 7.5 mm | 25 × 25 × 7.5 mm | 25 × 25 × 8 mm |
| Weight | 13.0 g | 14.0 g | 8.6 g | 7.2 g | 13.0 g | 12.0 g |
| Ceramic Antenna Dimensions | 25 × 25 × 4 mm | 25 × 25 × 4 mm | 18 × 18 × 4 mm | 15 × 15 × 4 mm | 25 × 25 × 4 mm | |
| Electronic Compass | QMC5883L | IST8310 | QMC5883L | QMC5883L | ||
| Operating Temperature | −35 to +75 °C | −35 to +75 °C | −35 to +75 °C | −35 to +75 °C | −35 to +75 °C | |
| Storage Temperature | −40 to +85 °C | −40 to +85 °C | −40 to +85 °C | −40 to +85 °C | −40 to +85 °C |
Compact trackers, portable navigation terminals, and embedded devices that require an integrated GNSS antenna.
Allow clearance above the ceramic patch. Connect the 6-pin SH interface to the host using the board pinout and configure the host for the 38400 bps default serial setting.
TOXU is an OEM engineering and manufacturing partner for GNSS and communications antennas, RF connectors, coaxial cable assemblies, and PCBA engineering and manufacturing. For GNSS projects, we help OEM teams select the receiver and antenna configuration, evaluate samples, and review mechanical and electrical integration before production.
Our R&D and manufacturing center in Shenzhen, Guangdong, supports engineering and prototype evaluation, with production support from our manufacturing base in Wuzhou, Guangxi. Our sales and technical support center in Changsha, Hunan, coordinates project requirements and sample feedback. Our overseas supply chain and manufacturing base in Bac Ninh, Vietnam, supports international sourcing and manufacturing programs.
TOXU holds ISO 9001 and IATF 16949 quality management system certifications.
TOXU company profile and certifications
Q: What is the positioning update rate?
A: The specified positioning update rate is 0.25 to 10 Hz.
Q: Does this module require an external GNSS antenna?
A: The board comes with an integrated ceramic patch antenna for GNSS reception.
Q: What are the board dimensions?
A: The complete board measures 28 × 28 × 6.5 mm.