




Language
Model: TX-FPV004
The TOXU TX-FPV004 is a 915 MHz T-shaped antenna for compatible FPV control and telemetry equipment. It features two PVC-jacketed antenna arms, a molded center section and a black coaxial lead with an MHF micro-coaxial plug.
915 MHz Nominal Tuning
Specified at 50 Ω with VSWR of 2.0 or less at 915 MHz.
152 mm T-Shaped Span
The two arms measure 152 ± 4 mm from tip to tip.
PVC-Jacketed Antenna Arms
The galvanized steel wire arms have black PVC jackets and meet at a molded PVC center section.
MHF Micro-Coaxial Plug
The black coaxial lead has a nominal outer diameter of 1.37 mm and terminates in an MHF plug.
The TOXU TX-FPV004 is a 915 MHz T-shaped antenna for compatible FPV control receivers and telemetry modules. Its two antenna arms extend from a molded center section, and the coaxial lead exits perpendicular to the arms.
The lead lets the antenna sit away from the radio board. It terminates in an MHF micro-coaxial plug for connection to a matching receptacle.
915 MHz RF Configuration
The antenna is tuned to a nominal frequency of 915 MHz and has a specified VSWR of 2.0 or less at that frequency.
T-Shaped Wire Construction
The black PVC-jacketed galvanized steel wire arms span 152 ± 4 mm from tip to tip.
MHF Plug with 1.37 mm Coaxial Lead
The black micro-coaxial lead connects the antenna to a matching board receptacle. Confirm the mating receptacle and required lead length before ordering.
| Attribute | Value |
|---|---|
| Product Model | TX-FPV004 |
| Antenna Type | T-shaped FPV antenna |
| Nominal Frequency | 915 MHz |
| VSWR at 915 MHz | ≤ 2.0 |
| Input Impedance | 50 Ω |
| Polarization | Linear |
| RF Connector | MHF micro-coaxial plug |
| Coaxial Cable | Black coaxial cable, 1.37 mm nominal outer diameter |
| Tip-to-Tip Span | 152 ± 4 mm |
| Center Section Width | 38 ± 3 mm |
| Lead Length | Confirm before ordering |
| Antenna Arm Construction | Galvanized steel wire with black PVC jacket |
| Center Section Material | Molded PVC |
The assembly drawing specifies a tip-to-tip span of 152 ± 4 mm and a center section width of 38 ± 3 mm. The lead dimension is marked L ± 5 mm, where L is the nominal length to be confirmed for the order.

FPV Control Receivers
For compatible 915 MHz receivers with a matching micro-coaxial receptacle.
915 MHz Telemetry Modules
For compatible telemetry equipment with room for the T-shaped antenna and its coaxial lead.
Confirm the radio's operating frequency, mating receptacle and required lead length. Allow clearance for both antenna arms and route the coaxial lead without pulling on the plug.
Check RF performance with the antenna in its intended mounting position and nearby components installed.
TOXU supplies communication antennas, RF connectors and coaxial cable assemblies. Share the operating frequency, host receptacle part number and required lead reach for a configuration review.
Connector Selection Support
TOXU can review the host receptacle drawing or part number to help confirm the mating interface.
Mechanical Fit Review
Share your mounting layout to check the antenna span, center section clearance and lead reach.
TOXU supplies communication antennas, GNSS antennas, RF connectors and coaxial cable assemblies for OEM equipment integration.
What frequency is the TX-FPV004 tuned to?
The nominal frequency is 915 MHz. Share your operating channels if you need performance verified across a specific range.
What does the 152 mm dimension measure?
It is the horizontal span from one antenna tip to the other, with a tolerance of ±4 mm. Confirm the coaxial lead length when ordering.
How do I confirm whether the MHF plug fits my board?
Provide the board receptacle part number or drawing so TOXU can check the mating interface.