-
Products -PCBA Manufacturing RF Connectors RF Cable Assemblys Embedded Antennas External Antennas GNSS Positioning Solutions
RF Connectors
RF Cable Assemblys
Embedded Antennas
External Antennas
GNSS Positioning Solutions
Language
Language
Model: TX-FPV001
The TOXU TX-FPV001 is a mushroom-head FPV antenna for compatible wireless video transmitters and receivers, including 5.8 GHz FPV systems.
Frequency Range: 4.2–6.0 GHz.
Polarization: Circular polarization with an omnidirectional radiation pattern.
Size and Weight: 34 mm nominal head diameter and 13 g nominal weight.
Overall Length: 150 ± 5 mm from the top of the antenna head to the end of the connector.
Connector: Confirm SMA or RP-SMA plug configuration when ordering.
The TOXU TX-FPV001 is a 50 Ω external FPV antenna covering 4.2–6.0 GHz, including the 5.8 GHz band used by compatible FPV video systems. It combines a circularly polarized helical element with a black mushroom-head housing and a pre-terminated coaxial lead.
4.2–6.0 GHz Frequency Coverage
The antenna covers the 5.8 GHz FPV band within its specified frequency range. Verify the operating channel of your transmitter or receiver before selecting the antenna.
Circularly Polarized Helical Element
The helical element provides circular polarization and an omnidirectional radiation pattern. Confirm the polarization handedness required by the antenna at the other end of the link.
13 g Mushroom-Head Assembly
The black ultrasonically welded plastic housing has a nominal diameter of 34 mm. The complete antenna assembly weighs 13 g nominally.
| Attribute | Value |
|---|---|
| Product Model | TX-FPV001 |
| Antenna Type | External helical FPV antenna |
| Frequency Range | 4.2–6.0 GHz |
| Nominal Impedance | 50 Ω |
| VSWR | ≤ 2.0 at 5.5 GHz |
| Polarization | Circular polarization |
| Radiation Pattern | Omnidirectional |
| Maximum Input Power | 1 W |
| Connector | SMA plug (center pin) or RP-SMA plug (center socket), depending on configuration |
| Housing | Black ultrasonically welded plastic |
| Antenna Head Diameter | Ø34 ± 2 mm |
| Overall Length | 150 ± 5 mm, including the antenna head and connector |
| Weight | 13 g nominal |
| Storage Temperature | −30 to +70 °C |
The drawing shows the antenna head diameter, overall length, and connector profiles. The 150 ± 5 mm dimension is measured from the top of the antenna head to the end of the connector.
Compatible 5.8 GHz FPV video transmitters and receivers
FPV goggles with a matching RF connector
Portable wireless video receivers and ground stations
Before installation, verify the operating frequency, connector thread and center contact, and the required circular polarization handedness. Check the head clearance and overall length against the available space, then evaluate reception with the antenna installed in its intended position.
TOXU supplies the TX-FPV001 as a pre-terminated antenna assembly. Share your radio model and connector requirements so the mating interface can be checked before ordering.
Can I use the TX-FPV001 with a 5.8 GHz FPV system?
Yes, 5.8 GHz falls within its specified frequency range. Confirm the connector and polarization requirements of your equipment before ordering.
How can I identify the SMA and RP-SMA plugs?
The SMA plug has a center pin. The RP-SMA plug has a center socket. Check both the thread and the center contact on the mating connector.
Does 150 mm refer to the cable length?
The drawing specifies 150 ± 5 mm for the complete assembly, measured from the top of the antenna head to the end of the connector.
Lucy Yang | lucy.y@toxutech.com
Dotty Zhao | sales04@toxutech.com
Global Business Director / Sales Team / Global Operations
En
Cn
Korean
Home > 
