Built-in RTK GPS Antenna
GNSS Car Antenna
GNSS Car Antenna

Products

Home >  Products > Embedded Antennas > Cellular Series > 
>
<

Embedded 4G LTE Main FPC Antenna with Mounting Bracket

Model: KC.IA.00477

The KC.IA.00477 is an embedded 4G LTE main antenna with an FPC element mounted on a plastic bracket for installation inside a device enclosure.

  • Frequency Range: 824–960 MHz and 1710–2690 MHz.

  • Antenna Gain: 3 dBi as specified in the product drawing.

  • Mounting: Black plastic bracket with two mounting holes and conductive foam for grounding.

  • RF Lead: 120 ± 5 mm black RF1.13 coaxial cable with a first-generation I-PEX-type plug.

  • Operating Temperature: −40 to +85 °C.

Leave a message Contact

Fill in your email address

Or you can continue to download without filling in

Product Description


Overview

The TOXU KC.IA.00477 is a 50 Ω embedded antenna for the main RF port of a compatible 4G LTE module. It covers 824–960 MHz and 1710–2690 MHz. The FPC antenna is supplied on a contoured plastic bracket with a coaxial lead and a conductive foam grounding contact.

Key Features

Two Cellular Frequency Ranges

The antenna covers 824–960 MHz and 1710–2690 MHz. Check the module’s required operating bands against these frequency ranges.

Bracket-Mounted FPC Element

The black plastic bracket has two mounting holes. Conductive foam on the underside provides a grounding contact within the host device.

Pre-Terminated Coaxial Lead

The black RF1.13 cable has a 1.13 mm outer diameter and a specified lead length of 120 ± 5 mm. It terminates in a first-generation I-PEX-type micro-coaxial plug.

Technical Specifications

AttributeValue
Product ModelKC.IA.00477
Antenna TypeEmbedded 4G LTE main FPC antenna
Frequency Range824–960 MHz / 1710–2690 MHz
Nominal Impedance50 Ω
VSWR2.0
Gain3 dBi
PolarizationLinear
Radiation PatternOmnidirectional
Bracket Dimensions (L × W × H)(112.5 ± 2) × (21.5 ± 0.5) × (11.3 ± 0.5) mm
MountingBlack plastic bracket with two mounting holes
Grounding ContactConductive foam on the underside of the bracket
Cable TypeBlack RF1.13 coaxial cable, 1.13 mm outer diameter
Lead Length120 ± 5 mm, measured as shown in the drawing
ConnectorFirst-generation I-PEX-type micro-coaxial plug
Operating Temperature−40 to +85 °C
Storage Temperature−40 to +85 °C

Dimension Drawing

The drawing shows the bracket profile, mounting holes, cable exit, and connector orientation. Use it to check enclosure clearance and cable routing before installation.

KC

Applications

  • Main antenna for compatible 4G LTE tablets and handheld terminals

  • Internal cellular connectivity for industrial data terminals

  • OEM devices with an enclosure designed to accommodate the bracket and grounding contact

System Integration

Verify the bracket fit, mounting hole locations, and mating connector before installation. Align the conductive foam with the designated grounding point. Check antenna performance with the device fully assembled, since nearby metal, PCB layout, and enclosure materials can affect RF performance.

Why Choose TOXU

The antenna ships as a bracket-mounted assembly with a pre-terminated coaxial lead. The product drawing gives hardware teams the dimensions and tolerances needed to check fit before sample testing.

FAQ

Which frequencies does this antenna cover?

It covers 824–960 MHz and 1710–2690 MHz. Confirm that the bands required by your LTE module and network fall within these ranges.

Does the antenna come with the bracket and cable?

Yes. The assembly includes the FPC element, the black plastic bracket, the conductive foam grounding contact, and the RF1.13 cable with its plug.

What should I check before installing it?

Check the bracket dimensions and mounting hole locations, confirm the mating connector, and make sure the cable reaches the module’s main RF port without pulling on the plug.

Leave a Message

Your Name *

Email *

Tel

Content *

GPS Active GPS Antenna GNSS RTK Antenna
GPS Active GPS Antenna GNSS RTK Antenna
GNSS RTK Antenna