




Language
Model: KC.IA.00694
The TOXU KC.IA.00694 is an adhesive-backed 4G LTE FPC antenna for installation inside compatible cellular devices.
Frequency Range: 824–960 MHz and 1710–2690 MHz.
FPC Size: 50 × 21.9 mm nominal footprint.
RF Lead: 50 ± 2 mm black RF1.13 coaxial cable with a first-generation I-PEX-type plug.
Mounting: Adhesive backing with a split release liner.
Operating Temperature: −40 to +85 °C.
The TOXU KC.IA.00694 is a 50 Ω embedded 4G LTE antenna built on a flexible printed circuit. It covers 824–960 MHz and 1710–2690 MHz and comes with an adhesive backing and a pre-terminated RF1.13 coaxial lead for internal device integration.
Two LTE Frequency Ranges
The antenna covers 824–960 MHz and 1710–2690 MHz. Check the operating bands required by your cellular module and network against these ranges.
Adhesive-Backed FPC Element
The antenna element measures 50 × 21.9 mm nominally and has a split release liner for placement inside the enclosure.
Pre-Terminated 50 mm RF Lead
The black 1.13 mm coaxial cable terminates in a first-generation I-PEX-type micro-coaxial plug. The finished drawing specifies a lead length of 50 ± 2 mm.
| Attribute | Value |
|---|---|
| Product Model | KC.IA.00694 |
| Antenna Type | Embedded 4G LTE FPC antenna |
| Frequency Range | 824–960 MHz / 1710–2690 MHz |
| Nominal Impedance | 50 Ω |
| VSWR | ≤ 4.0 |
| Gain (Drawing Specification) | 1.73 dB max. |
| FPC Dimensions (L × W) | (50 ± 0.3) × (21.9 ± 0.3) mm |
| Nominal FPC Thickness | 0.25 mm |
| Cable Type | Black RF1.13 coaxial cable, 1.13 mm outer diameter |
| Lead Length | 50 ± 2 mm, measured as shown in the drawing |
| Connector | First-generation I-PEX-type micro-coaxial plug |
| Mounting | Adhesive backing with split release liner |
| Operating Temperature | −40 to +85 °C |
The drawing shows the FPC outline, the hole in the FPC tab, the cable feed point, and the lead-length reference. Use it to check the available mounting area and the cable reach to the module’s RF connector.

Internal cellular connectivity for compatible LTE IoT devices
Embedded antenna integration in telemetry units and data terminals
OEM cellular equipment with a compatible RF receptacle and an internal mounting surface
Check the FPC footprint, connector fit, and cable reach before attaching the antenna. Verify RF performance with the device fully assembled, since the enclosure, nearby metal, and cable routing can affect antenna response.
TOXU supplies the KC.IA.00694 as a pre-wired antenna assembly. The dimensioned drawing gives hardware teams the FPC outline and lead-length tolerance they need to check fit before sample evaluation.
Which frequency ranges does this antenna cover?
It covers 824–960 MHz and 1710–2690 MHz. Compare these ranges with the bands required by your LTE module and network.
Does the antenna come with an RF cable and connector?
Yes. The assembly includes a 50 ± 2 mm black RF1.13 coaxial lead with a first-generation I-PEX-type micro-coaxial plug.
How is the antenna installed?
Check the fit and cable routing first, then peel away the release liner and place the FPC on the designated mounting surface inside the device.