TX-91-M10F ,The GNSS module is an ultra-low power consumption, ultra-high sensitivity and ultra-small size receiving module that can support GPS, GLONASS, BeiDou, and Galileo are the four major navigation systems in the world, supporting auxiliary DGPS satellites such as SBAS and QZSS. This product adopts the tenth generation ubloxM10050 chip design and has built-in LNA+SAW+FLASH, which can be perfectly capable of positioning, tracking, navigation, etc. application requirements. Especially suitable for high-frequency flight control model aircraft, UAVs, four-six-axis, multi-rotor aircraft, and can also be widely used in vehicle-mounted DVDs, PNDs, DVRs, portable devices, measurement equipment, personnel positioning management, tracking speed measurement equipment, and timing Equipment, pet tracking, school care management card, vehicle delivery tracking and positioning, taxi tracking and positioning, company vehicle tracking and positioning, logistics vehicle tracking and positioning, car fault detection, car oil level detection, automotive Internet of Things, excavator positioning and other products .
Module performance | |
chip | TX-91-M10F |
Freq. | GPS/L1,1575.42MHz; BeiDou/B1:1561.098±2.046MHz,Gl onass/L1=1602+0.5625MHZ Galileo/G1=1561.098±2.046MHzNM |
protocol | EA0183v4.1 UBX protocol |
Available serial transfer rates | 1200,4800,9600,19200,38400,57600,112500bps |
Channel | TBD |
InternalROM | 3MbitofROMand2MbitofRAM,8MSPIFlash |
Sensitivity | Track:-167dBm capture:-160dBm Cold boot:-148dBm |
Cold boot | average 27 seconds |
Warm start | average 10 seconds |
Hot boot | average 1 seconds |
Precision | HorizontalPosition:Autonomous2.0maverage,SBAS2.0maverageVelocity:0.1m/s;Timepulsesignal:RMS30ns |
maximum height | 50000M |
Timing accuracy | RMS30ns;99%<60ns |
Maximum speed | 515m/s |
maximum acceleration | 4G |
update frequency | 1-10Hz |
A-GPS | Assist Nowon-lineand off-line |
interface | |
I/OPins | 1serial ports |
physical properties | |
Type | 18pinstampholes |
Dimension | 9.7.0mm*10.1mm*2.4mm |
power supply | |
power supply | 3.3VDC±5% |
Backup voltage | 1.8~3.6VDC |
Power consumption | Maximum Performance: Capture:34mA,Tracking (in power saving mode/1HZ):10.5mA |
working environment | |
Humidity range | 5% to 95% non-condensing |
working temperature | -40℃ to 80℃ |